Nameless clears on driver side, passenger side is the issue, with the Ecohitch.
Mine just came today. I took a measurement to get the exhaust exit inside of the rail of the hitch (8.5"-9") & cut the axle-back. I was going to get it welded back up but I'm an impatient SOB, so I bought a 2" exhaust coupling & 2-2" exhaust clamps...,...,...fits like it was meant to be! Driver's side is in stock exhaust hanger, passenger side I drilled holes in the metal hangers (car/axle-back) and made my own hangers with stainless steel safety wire (I race motorcycles, so I have a ton of it around).
So no, straight from nameless, they don't fit. If you have a half a brain and want to make it work, completely doable.